No products in the cart.
Yongnuo YN560-TX + 2x Yongnuo YN560 IV for Canon
This lighting kit consists of 2x Yongnuo YN560 IV flashes and Yongnuo YN560-TX flash controller for Canon cameras. Yongnuo YN560 IV speedlites are Yongnuo’s latest manual flashes for both Canon and Nikon shooters. Yongnuo YN560-TX commander is also included in this kit to allow you to trigger these flashes remotely for much more creative freedom
Yongnuo YN560-TX + 2x Yongnuo YN560 IV lighting kit for Canon
Lighting is one of the most challenging aspects of photography, and yet it is so key. An external flash unit is one of the most effective ways of ensuring a correct exposure, but setting them up and usage them correctly is again a major challenge.
The biggest weakness of built-in and auxiliary flashguns is that the quality of light they emit is pretty unimpressive. Because the flash is a high-intensity light source that originates from a relatively small area close to the lens, it yields flat, uneven lighting that creates deep, harsh shadows.
The key to improving the quality and flexibility of flashgun lighting is to enlarge and soften the light source, and fire it at the subject from a more natural direction. To accomplish the latter you need to completely separate the unit from your camera and to achieve that, this Yongnuo lighting kit is all you need.
Using two or more flashguns will extend your lighting options considerably. To avoid multiple flash exposure calculations the simplest, most effective way to connect several flashguns is via a wireless multi-flash system.
Yongnuo YN560-TX flash commander allows you to trigger YN560 IV flashes remotely. This master unit also gives you full remote control of YN560 IV flashes. It is very convenient when flashes are mounted on light stands and you are using light modifiers. There is no need to go to the flash and change parameters, you can do everything remotely bu adjusting them on YN560-TX commander and these settings are immediately transmitted to flash units.
Yongnuo YN560 IV flashes have built in wireless receiver so you do not need separate radio triggers to trigger them remotely. You just need Yongnuo YN560-TX commander mounted on camera. These are the latest manual flash units with built in radio receiver. It is more convenient (and also less expensive) than using other flashes without built in wireless receiver because for other flashes you will also need separate radio triggers and more batteries and time to put all this together.
Yongnuo YN560 IV - specifications:
|Circuit design||Insulated Gate Bipolar Transistor (IGBT)|
|Guide No.||58 meters (ISO 100, 105mm)|
|Flash mode||Manual, Multi|
|Triggering Mode||Camera set-up, TX, TrX, S1, S2|
|Zoom range||24, 28, 35, 50, 70, 80, 105mm|
|Vertical rotation angle||-7~90 degrees|
|Horizontal rotation angle||0~270 degrees|
|Power supply||4×AA size batteries (Alkaline or Ni-MH are usable)|
|Lighting times||100~1500 times (AA alkaline cell used)|
|Recycle time||approx 3s (AA alkaline cell used)|
|Flash control||8 levels of output control (1/128~1/1), 29 levels of fine tuning|
|External interface||hot shoe, PC port and external charging port.|
|Wireless triggering distance||100m (2.4g wireless);20-25m indoor,10-15m outdoor (optical control)|
|Additional features||The electronic flash head zooming, sound prompt, automatically saving setting, power saving mode, overhearting protection and advanced options.|
Yongnuo YN560-TX - specifications:
- 6 Groups (meaning that it can control up to 6 flash groups as ABCDEF)
- Remote Manual Power Control
- Zoom Head Control
- Remote Multi (Stroboscopic) Setting
- Large Clear LCD Screen
- Fast Setting Interface
- 16 Channels
- 2,4GHz 100M Range
- AA batteries x 2 (not included)
- M / Multi Two flash modes
- Compatible with RF-602/RF-603/RF-603II
- Supports RF-603 /RF-603 II Wireless Shutter Release
- Stand-by Time: 120 hours
- Dimensions: 70mm*97.5mm*43mm
- Net Weight: 98g