Yongnuo YN560-TX + 2x Yongnuo YN560 IV

Yongnuo YN560-TX + 2x Yongnuo YN560 IV lighting kit for Nikon

Yongnuo YN560 IV flashes and YN560-TX flash commander are a great kit if you are interested in off-camera lighting.

Lighting is one of the most challenging aspects of photography, and yet it is so key. An external flash unit is one of the most effective ways of ensuring a correct exposure, but setting them up and usage them correctly is again a major challenge.
The biggest weakness of built-in and auxiliary flashguns is that the quality of light they emit is pretty unimpressive. Because the flash is a high-intensity light source that originates from a relatively small area close to the lens, it yields flat, uneven lighting that creates deep, harsh shadows.
The key to improving the quality and flexibility of flashgun lighting is to enlarge and soften the light source, and fire it at the subject from a more natural direction. To accomplish the latter you need to completely separate the unit from your camera and to achieve that, this Yongnuo lighting kit is all you need.

Using two or more flashguns will extend your lighting options considerably. To avoid multiple flash exposure calculations the simplest, most effective way to connect several flashguns is via a wireless multi-flash system.

Yongnuo YN560-TX flash commander allows you to trigger YN560 IV flashes remotely. This master unit also gives you full remote control of YN560 IV flashes. It is very convenient when flashes are mounted on light stands and you are using light modifiers. There is no need to go to the flash and change parameters, you can do everything remotely bu adjusting them on YN560-TX commander and these settings are immediately transmitted to flash units.

Yongnuo YN560 IV flashes have built in wireless receiver so you do not need separate radio triggers to trigger them remotely. You just need Yongnuo YN560-TX commander mounted on camera. These are the latest manual flash units with built in radio receiver. It is more convenient (and also less expensive) than using other flashes without built in wireless receiver because for other flashes you will also need separate radio triggers and more batteries and time to put all this together.

Yongnuo YN560 IV - specifications:

Circuit design	Insulated Gate Bipolar Transistor (IGBT)
Guide No.	58 meters (ISO 100, 105mm)
Flash mode	Manual, Multi
Triggering Mode	Camera set-up, TX, TrX, S1, S2
Zoom range	24, 28, 35, 50, 70, 80, 105mm
Vertical rotation angle	-7~90 degrees
Horizontal rotation angle	0~270 degrees
Power supply	4×AA size batteries (Alkaline or Ni-MH are usable)
Lighting times	100~1500 times (AA alkaline cell used)
Recycle time	approx 3s (AA alkaline cell used)
Color temperature	5600k
Flash duration	1/200s~1/20000s
Flash control	8 levels of output control (1/128~1/1), 29 levels of fine tuning
External interface	hot shoe, PC port and external charging port.
Wireless triggering distance	100m (2.4g wireless);20-25m indoor,10-15m outdoor (optical control)
Additional features	The electronic flash head zooming, sound prompt, automatically saving setting, power saving mode, overhearting protection and advanced options.