No products in the cart.
Yongnuo YN622C-TX + 2x YN622C II + 2x Yongnuo YN500EX
This bundle consists of 2x Yongnuo YN500EX flashes for Canon, Yongnuo YN622C-TX flash controller and 2x YN622C II transceivers. Yongnuo YN500EX speedlites are Yongnuo’s flashes very similar to Canon 430EX II speedlites. Yongnuo YN622C-TX commander and YN622C II triggers are included in this kit to allow you to trigger and control these flashes remotely which gives you much more creative freedom
Yongnuo YN622C-TX + 2x YN622C II + 2x Yongnuo YN500EX flashes lighting kit
Yongnuo YN622C-TX flash commander, Yongnuo YN500EX flashes and YN622C II triggers are a great combination if you are interested in off-camera lighting. Yongnuo YN500EX is Yongnuo flash for Canon users, very similar to Canon 430EX II in terms of features and power output but much more affordable. Yongnuo YN622C II are the best radio triggers on the market. Pair them with YN622C-TX master unit and you have perfect kit for off-camera lighting.
Lighting can be one of the most challenging aspects of photography, and yet it is so key. An external flash unit is one of the most effective ways of ensuring a correct exposure, but setting them up and usage them correctly is again a major challenge.
The biggest weakness of built-in and auxiliary flashguns is that the quality of light they emit is pretty unimpressive. Because the flash is a high-intensity light source that originates from a relatively small area close to the lens, it yields flat, uneven lighting that creates deep, harsh shadows.
The key to improving the quality and flexibility of flashgun lighting is to enlarge and soften the light source, and fire it at the subject from a more natural direction. To accomplish the latter you need to completely separate the unit from your camera and to achieve that, this Yongnuo lighting kit is all you need.
Using two or more flashguns will extend your lighting options considerably. To avoid multiple flash exposure calculations the simplest, most effective way to connect several flashguns is via a wireless TTL multi-flash system.
Yongnuo YN622C-TX flash commander together with YN622C II transceivers allow you to trigger YN500EX flashes remotely. This master unit also gives you full remote control of YN500EX flashes. It is very convenient when flashes are mounted on light stands and you are using light modifiers. There is no need to go to the flash and change parameters, you can do everything remotely by adjusting them on YN622C-TX commander and these settings are immediately transmitted to flash units.
Yongnuo YN500EX flashes don’t have built in wireless receiver so you need separate radio triggers to trigger them remotely. You need Yongnuo YN622C-TX commander mounted on camera and one YN622C II receiver mounted on each YN500EX flash.
Yongnuo YN500EX specifications
|Circuit design:||Insulated Gate Bipolar Transistor IGBT|
|Guide number (105mm):||53|
|Flash mode:||TTL, Manual, Multi, Sc, Sn, S1, S2|
|Zoom range:||Auto, 24, 35, 50, 70, 80, 105mm|
|Vertical rotation angle:||-7 ~ 90°|
|Horizontal rotation angle:||0 ~ 270°|
|Lighting time:||100 ~ 1500 times (AA Alkaline cell used)|
|Recycle time:||3 seconds|
|Flash duration time:||1/200s ~ 1/2000s|
|Flash control:||7 levels of output control (1/64 ~ 1/1), 25 levels of fine tuning|
|External interface:||hot shoe, PC port|
|Wireless triggering distance:||20 ~ 25m indoor, 10 ~ 15m outdoor|
|Power supply:||4x AA size batteries|
|Dimensions:||62 x 72 x 165mm|
Yongnuo YN622C-TX specifications:
|Range||328′ (100 m)|
|Groups||3 (A, B, C)|
|Flash Modes||TTL, manual, multi|
|Sync Mode||1st curtain, 2nd curtain, high-speed sync|
|Max Sync Speed||1/8000 sec|
|Interface||Triggering: Hot shoe, PC port
Shutter Release: 2.5mm
Firmware Upgrade: mini-USB
|Battery||2 x AA battery|
|Battery Life||Standby: 120 hours|
|Dimensions||3.5 x 2.1 x 1.5″ (9.0 x 5.3 x 3.9 cm)|
|Weight||2.9 oz (82 g)|