No products in the cart.
Yongnuo YN622C-TX + 3x Yongnuo YN685 kit
This bundle consists of 3x Yongnuo YN685 flash speedlites and Yongnuo YN622C-TX flash commander. Yongnuo YN685 flash speedlites are Yongnuo’s top of the line flashes for Canon users. These flashes come with built-in Yongnuo YN622C radio trigger so you do not need additional triggers. Yongnuo YN622C-TX commander is also included in this kit to allow you to trigger these flashes remotely for aditional creativity
Yongnuo YN622C-TX + 3x Yongnuo YN685 flashes lighting kit
Yongnuo YN685 flashes and Yongnuo YN622C-TX flash controller are a great combination if you are interested in off-camera lighting. This is an excellent kit for a classic 3-point lighting. Yongnuo YN622C-TX flash commander allows you to trigger YN685 flash speedlites remotely. This master unit also gives you full remote control of YN685 flashes. It is very convenient when flashes are mounted on light stands and you are using light modifiers. There is no need to go to the flash and change parameters, you can do everything remotely by adjusting them on YN622C-TX commander and these settings are immediately transmitted to flash units.
Yongnuo YN685 flashes have built in wireless receiver so you do not need separate radio triggers to trigger them remotely. You just need Yongnuo YN622C-TX commander mounted on camera. These are the first flash units with built in YN622C radio receiver for Canon system. It is more convenient (and also less expensive) than using other flashes without built in wireless receiver because for other flashes you will also need separate radio triggers and more batteries and time to put all this together
Lighting can be one of the most challenging aspects of photography, and yet it is so key. An external flash unit is one of the most effective ways of ensuring a correct exposure, but setting them up and usage them correctly is again a major challenge.
The biggest weakness of built-in and auxiliary flashguns is that the quality of light they emit is pretty unimpressive. Because the flash is a high-intensity light source that originates from a relatively small area close to the lens, it yields flat, uneven lighting that creates deep, harsh shadows.
The key to improving the quality and flexibility of flashgun lighting is to enlarge and soften the light source, and fire it at the subject from a more natural direction. To accomplish the latter you need to completely separate the unit from your camera and to achieve that, this Yongnuo lighting kit is all you need.
Using two or more flashguns will extend your lighting options considerably. To avoid multiple flash exposure calculations the simplest, most effective way to connect several flashguns is via a wireless TTL multi-flash system.
Yongnuo YN685 specifications
- GN 60m (ISO 100 / 200mm)
- HSS to 1/8000th
- Flash Modes – ETTL / Manual / Multi
- 1st Curtain Sync / 2nd Curtain Sync
- FEC / FEB – 1/3rd Increments (±3 stops)
- Manual Flash – 1/128 – 1/1 output control (1/3rd increments)
- 20 – 200mm Auto and Manual Flash Zoom
- Built-in Radio Slave Modes – YN622C & RF-603 / YN560, 2.4GHz RF Systems.
- Full Power Recycle – From 3 Seconds
- Supports Multiple Flash Groups
- Supports Multiple Channels
- Supports Mixed Mode (with YN-622C transmitter)
- Custom Functions
- Auto Save Settings
- Sound Prompt
- Heat Protection
- Large Dot Matrix LCD Screen
- Canon Like Interface
- AF Assist Light
- 360 Degree Swivel and Tilt Head
- Fast Clamping Metal Foot
- External HV Battery Port
- PC Sync Port
Yongnuo YN622C-TX specifications:
|Range||328′ (100 m)|
|TTL Dedication||E-TTL / E-TTL II|
|Groups||3 (A, B, C)|
|Flash Modes||TTL, manual, multi|
|Sync Mode||1st curtain, 2nd curtain, high speed sync|
|Max Sync Speed||1/8000 sec|
|Interface||Triggering: Hot shoe, PC port|
Shutter Release: 2.5mm
Firmware Upgrade: mini-USB
|Battery||2 x AA battery|
|Battery Life||Standby: 120 hours|
|Dimensions||3.5 x 2.1 x 1.5″ (9.0 x 5.3 x 3.9 cm)|
|Weight||2.9 oz (82 g)|