Yongnuo YN-E3-RX

Yongnuo YN-E3-RX

$54.00

Yongnuo YN-E3-RX is a Canon RT radio compatible receiver unit, now opening the system up to include legacy ETTL slave flash units like the previous Canon 580EX II. This receiver also allows manual studio lights or speedlites to be fired when using RT transmitter unit as well. This means that non RT speedlites like the Canon 580EX II or YongNuo YN-568EX II can now act as RT compatible slave flashes when using the Canon ST-E3-RT / YN-E3-RT, or 600EX-RT / YN600EX-RT as transmitter. A lack of separate receiver unit has previously been the biggest limitation to the industry leading Canon RT radio flash system so now YongNuo are bridging together 2 of Canon’s completely separate, and previously incompatible, radio flash systems with the YN-E3-RX receiver

Yongnuo YN-E3-RX | Wireless flash receiver for Canon

Yongnuo YN-E3-RX allows you to remotely trigger your compatible E-TTL flash with this receiver and Yongnuo Flash and Transmitters. The receiver has a 1/4″-20 female mounting thread, a female hot shoe, and USB port for firmware upgrades. Operating on the 2.4 GHz frequency, the receiver has 15 channels to thwart interference and can wirelessly trigger flash units in any of its 5 groups singly or in unison at distances up to 100m. The user-friendly LCD screen allows monitoring of channel and groups in use, battery level and +/- flash exposure compensation. It also indicates E-TTL, Manual or Multi (stroboscopic) flash mode selection. The Yongnuo YN-E3-RX runs for a total of 24 hours on 2 separately purchased AA batteries.

Yongnuo YN-E3-RX - features

Wireless flash receiver, works within area of 100 square meters( without interference).
Supports flash modes: E-TTL, Manual, MULTI.
Supports remote shutter release function and test flash.
Supports single contact flash triggering.
Has PC output interface. Supports USB upgrades
LCD display shows flash mode, flash output power, ID and so on for easy operation.
Comes with a cable and an adapter plug to match your needs better.

Yongnuo YN-E3-RX - specifications:

Transmission range	100m (without interference)
Channels	Auto, channel 1-15
Groups	5 groups (A/B/C/D/E)
Frequency	2405-2475MHZ
Wireless ID	0000-9999
USB firmware upgrade	YES / Supported
Batteries	2 x AA size (1.2V rechargeable batteries also supported), not included
Working time	24 hours with 1 set of batteries
Product size	9 * 5 * 2.5cm / 3.5 * 2 * 1in
Product weight	73g / 2.6oz
Package size	10 * 8 * 6.5cm / 3.9 * 3.1 * 2.5in
Package weight	152g / 5.4oz