Yongnuo Flashes for Canon & Nikon DSLRs

Yongnuo YN622N Kit

$78.00

Yongnuo YN622N Kit for Nikon. This kit is a combination of YN622N-TX master commander and YN622N trigger. The world’s most popular choice for multiple flashes photography. YN622 triggers support TTL, HSS, manual, multi modes, Flash Exposure Compensation, Flash Exposure Bracketing, modeling Flash, I-TTL group ratios and much more… These are the most popular triggers worldwide. Paired with YN622N-TX master controller they have all the same functions as much more expensive Phottix Odin, Pixel King or Pocket Wizards. We have never heard of anyone who is not impressed with Yongnuo YN-622N triggers

Yongnuo Store - Free shipping

Yongnuo YN622N Kit | Triggers for Nikon

Yongnuo YN622N i-TTL Wireless Flash Transceiver & TX Controller Kit which bundles together a YN622N Transceiver with the YN622N-TX Controller should be your entry to the advanced wireless flash control. Compatible with Nikon i-TTL cameras, the controller slides directly into the hot shoe and utilizes a 2.4 GHz frequency with a range of 100m to trigger the remote flashes. The controller also has TTL, manual, and multi flash modes available for full creative control of a flash unit mounted on the YN622N Transceiver. Additionally, the system can utilize 7 channels and 3 groups for setting up multiple flash units easily and efficiently.

The Yongnuo YN622N-TX utilizes an LCD screen to display settings and allow users to make adjustments. On the device is also an AF assist beam to help in low-light conditions. Multiple sync modes are available for more specific needs or effects, including 1st and 2nd curtain sync. A high-speed sync mode will help in bright lighting conditions and for stopping motion with a maximum speed of 1/8000 second. A built-in mini-USB port enables firmware updates to be installed, and the device runs on 2 AA batteries.

The transceivers have a hot shoe and PC sync port available for mounting a flash unit. The YN622N also utilizes a series of LEDs to display settings and allow users to make adjustments. On the device is also an AF assist beam to help in low-light conditions. Multiple sync modes are available for more specific needs or effects, including 1st and 2nd curtain sync. A high-speed sync mode is available when a flash is connected via the PC sync port and will help in bright lighting conditions and for stopping motion with a maximum speed of 1/8000 second. Additionally, the transceiver runs on 2 AA batteries.

Yongnuo YN622N Kit - features

  • Yongnuo YN622N support Full TTL Pass-through function when on camera – 1) Mount one YN622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. 2) Mount flash on hot shoe of YN622N transceiver already placed on camera, mount the second flash on other transceiver, both of flashes can be triggered at any direction in TTL, Manual or Multi mode.
  • Shutter Sync – The max. sync speed is 1/8000s, but some cameras support only up to 1/4000s, and for those cameras and flashes which don’t suport HSS, the sync. speed will be just 1/250s or less. Different cameras have different Sync speed. This depends on camera, and it is not a limitation of YN622N triggers.
  • YN622N triggers support 1st and 2nd curtain sync
  • Remote Control Function – The parameter of flashes mounted on hot shoes of receivers can be set up remotely through the camera menu. You can find external speedlite menu in cameras options. There you will change all parameters of remote speedlite
  • Support mixed mode – With this function, you can trigger remote speedlites in different modes; set up one YN-622N transceiver on hot shoe of flash in TTL mode, set up the second YN-622N transceiver on hot shoe of flash in manual mode, and the third YN-622N transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver mounted on hot shoe of camera. This mode is especially useful for some older camera bodies without a built-in flash menu. ( you need to set the parameters on speedlites )Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manual and Multi output need to be set on the flash speedlite.
  • YN622N triggers work with Strobe Studio flash light in HSS function – You can buy a PC Sync Cable LS-PC635 cable to connect the transceiver with the studio flash strobe, and then you can use the non-high speed sync flash to achieve higher synchronization and then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage.
    Note: The PC port is for output use only.
  • Awakening function – When half-pressing the shutter button of the camera, the hot shoe flash mounted on the receiver will be awakened. (for those flashes which support wake up function).
  • Zoom Function – Zoom Automatic: zoom length will be changed depending on the changes of the lens setting.
    Zoom Manual: Zoom length can be set within 24 – 105mm range
    Zoom Lock
  • Support Single-contact of camera and flash triggering – You can use YN622N trigger with Canon camera or Canon flash, but you have to set YN-622N in manual mode (the max. Sync. speed is 1/250s in this case).
  • Flash Fire Ratios with TTL – You can set up different flash fire ratios and FEC for those flashs on hot shoe of receivers
  • YN622N triggers use 2x AA batteries, (1.2v rechargeable battery or Alkaline), Stand-by time is 60 hours.
  • Dimension: 89.5 * 53 * 39mm, net weight is 78g.

Yongnuo YN622N Kit - compatible with:

Compatible cameras:

Nikon D4, D3X, D3S, D3, D2X, D800E, D800, D810, D750, D700, D610, D600, D300S, D300, D200, D7000, D7100, D7200, D90, D80, D5200, D5100, D5300, D5000, D3300, D3200, D3100, D3000, D60, D40X, D40 and any other newer Nikon DSLR camera

Compatible flashes:

Nikon: SB400, SB600, SB700, SB800, SB900, SB910,

Yongnuo: YN465N, YN467N, YN468N(II), YN560 II, YN560 III, YN560 IV, YN660, YN565EX, YN568EX

Flashes of other brands are also compatible: Nissin, Metz…

Studio strobes:

You can use YN622N triggers to fire studio strobes. You just need sync cable. Please check our excellent LS-PC635 sync cable

Yongnuo YN622N Kit - package includes:

1 x YN-622N-TX Master Controller for Nikon
1 x YN-622N Trigger for Nikon
1 x Nikon N1 Shutter Release Cable
1 x Nikon N3 Shutter Release Cable
1 x Manual

Reviews


There are no reviews yet.

Be the first to review “Yongnuo YN622N Kit”