Yongnuo Flashes for Canon & Nikon DSLRs

Yongnuo YN600EX-RT II

$117.99

Yongnuo YN600EX-RT II

Yongnuo YN600EX-RT II Wireless Flash Speedlite for Canon SLR Camera. The best and most powerful Yongnuo flash ever. Fully compatible with Canon RT system. Can be used in combination with Canon’s 600EX-RT (II), 430EX III-RT speedlites or ST-E3-RT commander, or with Yongnuo YN-E3-RT commander.

Yongnuo Store - Free shipping

Yongnuo YN600EX-RT II | Flash speedlite for Canon

Yongnuo YN600EX-RT II Wireless Flash Speedlite for Canon SLR Camera. YN-600EX-RT II has exactly the same functions as the Canon’s best flash 600EX-RT II. Same functions, same power, even the same appearance, TTL, HSS, Master mode… But much lower price. The best buy speedlite for Canon users

Fully compatible with Canon’s 2.4 GHz radio flash trigger system and E-TTL / E-TTL II metering, the Speedlite YN600EX-RT II from Yongnuo is designed as a useful accessory for your Canon camera. It features a powerful guide number of 60m at ISO 100 and 200mm as well as an impressive zoom range of 20-200mm, along with a wide-angle panel for 14mm coverage on full-frame cameras. Bounce lighting is also possible with tilt from -7 to 90° and rotation left and right 180°.

Along with radio transmission and reception for wireless triggering, the wireless TTL master and slave functionality of this flash also extends to standard optical pulse triggering, where the YN600EX-RT II is compatible with both Nikon and Canon flash systems. Also, it has a recycle time of about 3 seconds and has high-speed, 1st and 2nd curtain synchronization settings. And, it has a multi flash stroboscopic mode for multiple flashes during a single exposure. It runs on 4 AA batteries and comes with a case and mini stand.

Yongnuo YN600EX-RT II features

Supports RT System – One YN600EX-RT II can be used as on-camera master unit and remote slave unit of Canon’s RT system, and supports Gr grouping mode.
Fully Compatible with Yongnuo YN-E3-RT, Canon’s 600EX-RT (II)/ST-E3-RT Wireless Signal – One YN600EX-RT II can be used as master unit to trigger YONGNUO YN600EX-RT (II), Canon 600EX-RT (II),and live display the flash groupings of slave unit and recycling information; One YN600EX-RT II can respectively receive the wireless signal of master unit YN600EX-RT, YN-E3-RT, Canon’s 600EX-RT/ST-E3-RT, realizing remote TTL,Manual and Gr mode.
High Guide Number, Supports High-speed Synchronization, GN60@ISO100, 200mm; supports high-speed sync TTL, manual flash, Gr grouping flash, the highest synchronization speed can reach 1/8000s
Supports USB Firmware Upgrades – The YN600EX-RT II is equipped with the USB interface and supports firmware upgrades. Users can download the latest firmware from our firmware downlods page to upgrade the flash unit software.
Supports Wireless Optical Slave function – The YN600EX-RT II supports Yongnuo, Canon’s and Nikon’s wireless optical master signal, supports S1 and S2 pre flash cancel mode.
Support Auto/Manual Zooming – The YN600EX-RT II supports auto and manual zooming, the flash coverage can be changed between AUTO, 20~200mm.
Settings are saved automatically, Supports Custom Settings (Fn). The parameters on the flash will be automatically saved when the flash turns off; the users can customize settings of the flash functions as needed.
Ultrafast Charging Recycle System, Supports External Power Supply
Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface

Yongnuo YN600EX-RT II specifications

Circuit design Insulated Gate Bipolar Transistor (IGBT)
Guide Number 60 meters (ISO 100, 200mm)
Flash mode HSS, TTL, M, MULTI, GR
Trigger Mode Set-top, wireless master mode, wireless slave mode, optical master mode, Sc, Sn, S1, S2
Wireless triggering distance 20~25m indoor, 10~15m outdoor
Zoom range 20, 24, 28, 35, 50, 70, 80, 105, 135, 200mm
Vertical rotation angle -7~90 degrees
Horizontal rotation angle 0~360 degrees
Power supply 4×AA size batteries (Alkaline or Ni-MH are usable)
Lighting times 100~1500 times (AA alkaline cell used)
Recycle time approx 3s (AA alkaline cell used)
Color temperature 5600k
Flash time 1/200s~1/20000s
Flash control 8 levels of output control (1/128~1/1), 29 levels of fine tuning
External interface hot shoe, PC port
Additional features Master flash, High-Speed sync, Second-curtain sync, FEC, FEB, FEV, manual zoom,
auto zoom, sound prompt, advanced setting, automatically saving setting, PC port,
power saving mode and over heat protection
Dimensions 62×78×214mm (Extended state)
Net weight 430g

Yongnuo YN600EX-RT II - Compatible with :

1) Hot shoe TTL mode:

Canon 1Dx, 1Ds series, 1D series, 5DIII, 5Ds, 5Dsr, 6D, 7D mark II, 5DII, 5D, 7D, 70D, 60D, 50D, 40D, 30D, 20D, 700D, 650D/T4i, 600D/T3i, 550D/T2i, 500D/T1i, 450D/Xsi, 400D/Xti, 350D, 100D, 1100D, 1000D, 750D, 760D and other Canon camera bodies

2) Wireless TTL Slave mode:

Canon 5DIII 7D 60D 700D 650D 600D, Yongnuo ST-E2, Canon 580EX II
Nikon SB-910, SB-900, SB-800, SB-700, Commander SU-800,
Camera with CLS i-TTL system:D4, D3x, D3s, D3, D2x, D700, D300s, D300, D200, D7000, D90, D80

Canon Commander ST-E3-RT
Yongnuo Commander YN-E3-RT

Yongnuo YN600EX-RT II - Package includes:

1 x Flash speedlite YN600EX-RT II
1 x Mini Stand
1 x Manual in English and Chinese
1 x Original box

Reviews


There are no reviews yet.

Be the first to review “Yongnuo YN600EX-RT II”