Yongnuo YN622N i-TTL Wireless Flash Transceiver & TX Controller Kit which bundles together a YN622N Transceiver with the YN622N-TX Controller should be your entry to the advanced wireless flash control. Compatible with Nikon i-TTL cameras, the controller slides directly into the hot shoe and utilizes a 2.4 GHz frequency with a range of 100m to trigger the remote flashes. The controller also has TTL, manual, and multi flash modes available for full creative control of a flash unit mounted on the YN622N Transceiver. Additionally, the system can utilize 7 channels and 3 groups for setting up multiple flash units easily and efficiently.

The Yongnuo YN622N-TX utilizes an LCD screen to display settings and allow users to make adjustments. On the device is also an AF assist beam to help in low-light conditions. Multiple sync modes are available for more specific needs or effects, including 1st and 2nd curtain sync. A high-speed sync mode will help in bright lighting conditions and for stopping motion with a maximum speed of 1/8000 second. A built-in mini-USB port enables firmware updates to be installed, and the device runs on 2 AA batteries.

The transceivers have a hot shoe and PC sync port available for mounting a flash unit. The YN622N also utilizes a series of LEDs to display settings and allow users to make adjustments. On the device is also an AF assist beam to help in low-light conditions. Multiple sync modes are available for more specific needs or effects, including 1st and 2nd curtain sync. A high-speed sync mode is available when a flash is connected via the PC sync port and will help in bright lighting conditions and for stopping motion with a maximum speed of 1/8000 second. Additionally, the transceiver runs on 2 AA batteries.

Yongnuo YN622N Kit - features

• Yongnuo YN622N support Full TTL Pass-through function when on camera – 1) Mount one YN622N transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. 2) Mount flash on hot shoe of YN622N transceiver already placed on camera, mount the second flash on other transceiver, both of flashes can be triggered at any direction in TTL, Manual or Multi mode.
• Shutter Sync – The max. sync speed is 1/8000s, but some cameras support only up to 1/4000s, and for those cameras and flashes which don’t suport HSS, the sync. speed will be just 1/250s or less. Different cameras have different Sync speed. This depends on camera, and it is not a limitation of YN622N triggers.
• YN622N triggers support 1st and 2nd curtain sync
• Remote Control Function – The parameter of flashes mounted on hot shoes of receivers can be set up remotely through the camera menu. You can find external speedlite menu in cameras options. There you will change all parameters of remote speedlite
• Support mixed mode – With this function, you can trigger remote speedlites in different modes; set up one YN-622N transceiver on hot shoe of flash in TTL mode, set up the second YN-622N transceiver on hot shoe of flash in manual mode, and the third YN-622N transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver mounted on hot shoe of camera. This mode is especially useful for some older camera bodies without a built-in flash menu. ( you need to set the parameters on speedlites )Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manual and Multi output need to be set on the flash speedlite.
• YN622N triggers work with Strobe Studio flash light in HSS function – You can buy a PC Sync Cable LS-PC635 cable to connect the transceiver with the studio flash strobe, and then you can use the non-high speed sync flash to achieve higher synchronization and then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage.
  Note: The PC port is for output use only.
• Awakening function – When half-pressing the shutter button of the camera, the hot shoe flash mounted on the receiver will be awakened. (for those flashes which support wake up function).
• Zoom Function – Zoom Automatic: zoom length will be changed depending on the changes of the lens setting.
  Zoom Manual: Zoom length can be set within 24 – 105mm range
  Zoom Lock
• Support Single-contact of camera and flash triggering – You can use YN622N trigger with Canon camera or Canon flash, but you have to set YN-622N in manual mode (the max. Sync. speed is 1/250s in this case).
• Flash Fire Ratios with TTL – You can set up different flash fire ratios and FEC for those flashs on hot shoe of receivers
• YN622N triggers use 2x AA batteries, (1.2v rechargeable battery or Alkaline), Stand-by time is 60 hours.
• Dimension: 89.5 * 53 * 39mm, net weight is 78g.

Yongnuo YN622N Kit - compatible with:

Compatible cameras:

Nikon D4, D3X, D3S, D3, D2X, D800E, D800, D810, D750, D700, D610, D600, D300S, D300, D200, D7000, D7100, D7200, D90, D80, D5200, D5100, D5300, D5000, D3300, D3200, D3100, D3000, D60, D40X, D40 and any other newer Nikon DSLR camera

Compatible flashes:

Nikon: SB400, SB600, SB700, SB800, SB900, SB910,

Yongnuo: YN465N, YN467N, YN468N(II), YN560 II, YN560 III, YN560 IV, YN660, YN565EX, YN568EX

Flashes of other brands are also compatible: Nissin, Metz…

Studio strobes:

You can use YN622N triggers to fire studio strobes. You just need sync cable. Please check our excellent LS-PC635 sync cable

Yongnuo YN622N Kit - package includes:

1 x YN-622N-TX Master Controller for Nikon
1 x YN-622N Trigger for Nikon
1 x Nikon N1 Shutter Release Cable
1 x Nikon N3 Shutter Release Cable
1 x Manual

The post Yongnuo YN622N Kit appeared first on Yongnuo Store.

Yongnuo YN560-TX transmitter unit provides remote manual power control for the very popular and inexpensive Yongnuo YN560 III,  YN560 IV and YN660 manual flash units. Yongnuo YN560-TX transmitter is a great tool for creating very affordable multi-strobe setup with remote manual power control. An excellent flash controller for studio or on location shooting.

The Yongnuo 560-TX is a huge advancement in speedlite flash control.  Paired with Yongnuo YN-560 III/ YN-560 IV, YN660 speedlites you now have the ability to remotely control power output from one easy to use location. Control up to 6 groups all from the easy to use LCD screen. Imagine never having to walk over to a speedlite to adjust it again. The best part is that the YN-560 III/ YN-560 IV, YN660 speedlites have a built in radio trigger so you don’t need any receiver on the flash units.  Just buy a YN-560 III/ YN-560 IV or YN660 speedlite and one YN 560-TX and that’s it.

The 560-TX will work on any camera with a standard hot-shoe. Nikon and Canon versions are available.  They enable the flash wakeup feature.  If you don’t shoot Canon or Nikon, then either option will work but you’ll lose the wakeup feature.  We recommend to turn off the YN-560 III/ YN-560 IV speedlite sleep option so you’ll never have to worry about it.  All other features are the same.

Yongnuo YN560-TX - features

1. Wireless Triggering Function – If you use it in combination with Yongnuo YN560 III, YN560 IV, YN660 flashes, you need to activate the group function of YN-560 III /IV, YN660 with YN560-TX before you can use them together (for more details please check manual); If you use YN560-TX with other Yongnuo flashes like YN-560 II, YN565EX, YN568EX ( Manual mode ), you need a transceiver unit like Yongnuo RF-605, RF-603, RF-603 II, RF-602
2. Wireless Shutter Release Function – You can mount YN560-TX into the Camera, use shutter release cable ( LS-2.5mm Series ) to connect it with your camera, and set RF-602, RF-603, RF-603 II in ” transceiver ” state, and then you can remotely trigger your camera. You can also mount one flash into the hot shoe of flash transceiver, and it can also be triggered at the same time.

Yongnuo YN560-TX - specifications:

• 6 Groups (meaning that it can control up to 6 flash groups as ABCDEF)
• Remote Manual Power Control
• Zoom Head Control
• Remote Multi (Stroboscopic) Setting
• Large Clear LCD Screen
• Fast Setting Interface
• 16 Channels
• 2,4GHz 100M Range
• AA batteries x 2 (not included)
• M / Multi Two flash modes
• Compatible with RF-602/RF-603/RF-603II
• Supports RF-603 /RF-603 II Wireless Shutter Release
• Stand-by Time: 120 hours
• Dimensions: 70mm*97.5mm*43mm
• Net Weight: 98g

Yongnuo YN560-TX - compatible with:

• Yongnuo YN560 III made after January 2013,  Yongnuo YN560 IV and Yongnuo YN660
• Yongnuo triggers RF-602 , RF-6​03 , RF-603 II
• Yongnuo flashes like YN-560 II, YN-468 II, YN500EX, YN600EX-RT, YN565EX, YN568EX and other in manual mode. (You need to use RF-602, RF-603, RF-603 II, RF-605 together.)
• All Nikon and Canon DSLR Cameras

Note: There are Canon and Nikon version of YN560-TX. Both versions will operate with any camera model which have a standard hotshoe, but the dedicated Canon and Nikon function is just for the flash wake up feature

Yongnuo YN560-TX - package includes:

1 x Yongnuo YN-560TX Flash controller for Nikon Cameras
1 x Manual in English and Chinese
1 x Original Box

The post Yongnuo YN560-TX for Nikon appeared first on Yongnuo Store.

Yongnuo YN-622N-TX transmitter acts as a master control unit for the very popular YN622N I-TTL and Manual transceivers, providing more functions and a far more user friendly built-in LCD user interface.

Yongnuo YN622N-TX also adds a USB port for firmware updates, which is major advantage over the current triggers. The improved YN622N-TX also enhances stability, as well as improving information transmission speeds.

Note: Yongnuo YN622N-TX is meant to be used in combination with Yongnuo Flash Triggers YN622N or YN622N II.

Yongnuo YN-622N-TX features

• 3 Groups ( A/B/C)
• Mix TTL, Remote Manual, and SuperSync Groups
• Sync mode ( 1st curtain, 2nd curtain sync, High speed sync ( Auto FP ) )
• Max Sync. Speed: 1/8000s
• Trigger Interface: Hot shoe, PC
• Individual 1/3rd stop Manual Power and FEC adjustments
• Remote Flash Zoom in 3 groups, and Auto Zoom
• 2nd Curtain Sync, HSS, SuperSync
• USB port for Firmware Updates. Check our support page for the latest firmware version.
• AF Assist Light to help camera focus in low light situations
• Remote Shutter Release Function
• Dedicated Buttons for Fast Adjustments
• Battery Level Indicator
• 2.5mm shutter release interface (You will get two cables in package, N1 and N3 fir different Nikon cameras)
• PC Interface ( You can buy RF-602 PC/PC to connect it with your camera )
• 7 Channels
• Improved Stability and Transmission Speed
• SuperSync Manual Timing Adjustment by Group
• Flash Value Lock function (FVL)
• Modeling Flash & Red-Eye Reduction flash
• Settings Saved Automatically
• Up To 100M Range

Yongnuo YN-622N-TX specifications:

Yongnuo YN-622N-TX compatible with:

Compatible Cameras:

Nikon: D70, D70s, D80, D90, D200, D300s, D600, D610, D700, D750, D800, D810, D3000, D3100, D3200, D3300, D5000, D5100, D5200, D5300, D7000, D7100, D7200 and any newer Nikon DSLR camera

Compatible Flashes:

A: TTL Flashes: (these flashes suport wireless remote control through camera menu)

• Nikon SB-910, SB-900, SB-800, SB-700, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24
• Yongnuo Flashes for Nikon version: YN568EX, YN565EX, YN-468II, YN-467II, YN-465
• Other brand flashes working with Nikon system: Metz, Sunpak, Oloong, Triopo

B: Other Flashes: (TTL function and HSS not supported with Nikon camera and YN622N-TX transmitter combination)

• Canon 580EX, 550EX, 540EZ, 430EX, 430EZ, 420EX, 420EZ, 380EX, 600EX-RT
• Yongnuo YN-560III, YN560IV, YN560EX, YN-560, YN-460II, YN-460, YN600EX-RT
• Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT
• Sigma EF-500 DG Super, EF-500 DG ST, EF-430
• Other brand flashes not for Nikon: Metz, Sunpak, Oloong, Triopo

Yongnuo YN-622N-TX - package includes:

1 x Yongnuo YN-622N-TX master Controller for Nikon
1 x LS-2.5/N1 Shutter Connecting Cable
1 x LS-2.5/N3 Shutter Connecting Cable
1 x Manual in Chinese and English
1 x Original box

The post Yongnuo YN-622N-TX appeared first on Yongnuo Store.