Yongnuo YN600EX-RT flashes and YN-E3-RT flash commander are a great combination if you are interested in off-camera lighting.
Lighting can be one of the most challenging aspects of photography, and yet it is so key. An external flash unit is one of the most effective ways of ensuring a correct exposure, but setting them up and usage them correctly is again a major challenge.
The biggest weakness of built-in and auxiliary flashguns is that the quality of light they emit is pretty unimpressive. Because the flash is a high-intensity light source that originates from a relatively small area close to the lens, it yields flat, uneven lighting that creates deep, harsh shadows.
The key to improving the quality and flexibility of flashgun lighting is to enlarge and soften the light source, and fire it at the subject from a more natural direction. To accomplish the latter you need to completely separate the unit from your camera and to achieve that, this Yongnuo lighting kit is all you need.

Using two or more flashguns will extend your lighting options considerably. To avoid multiple flash exposure calculations the simplest, most effective way to connect several flashguns is via a wireless TTL multi-flash system.

Yongnuo YN-E3-RT flash commander allows you to trigger YN600EX-RT flashes remotely. This master unit also gives you full remote control of YN600EX-RT flashes. It is very convenient when flashes are mounted on light stands and you are using light modifiers. There is no need to go to the flash and change parameters, you can do everything remotely bu adjusting them on YN-E3-RT commander and these settings are immediately transmitted to flash units.

Yongnuo YN600EX-RT flashes have built in wireless receiver so you do not need separate radio triggers to trigger them remotely. You just need Yongnuo YN-E3-RT commander mounted on camera. These are the first flash units with built in radio receiver for Canon system. It is more convenient (and also less expensive) than using other flashes without built in wireless receiver because for other flashes you will also need separate radio triggers and more batteries and time to put all this together

Yongnuo YN600EX-RT specifications

Yongnuo YN-E3-RT specifications:

Yongnuo YN-E3-RT + 2x Yongnuo YN600EX-RT flashes kit - Package includes:

1 x Yongnuo YN-E3-RT flash commander
2 x Yongnuo YN600EX-RT flash speedlites

The post Yongnuo YN-E3-RT + 2x Yongnuo YN600EX-RT appeared first on Yongnuo Store.

Yongnuo YN600EX-RT flash speedlites and YN-E3-RT flash commander are a great combination if you are interested in off-camera lighting. This is an excellent kit for a classic 3-point lighting. Yongnuo YN-E3-RT flash commander allows you to trigger YN600EX-RT flashes remotely. This master unit also gives you full remote control of YN600EX-RT flashes. It is very convenient when flashes are mounted on light stands and you are using light modifiers. There is no need to go to the flash and change parameters, you can do everything remotely bu adjusting them on YN-E3-RT commander and these settings are immediately transmitted to flash units.

Yongnuo YN600EX-RT flashes have built in wireless receiver so you do not need separate radio triggers to trigger them remotely. You just need Yongnuo YN-E3-RT commander mounted on camera. These are the first flash units with built in radio receiver for Canon system. It is more convenient (and also less expensive) than using other flashes without built in wireless receiver because for other flashes you will also need separate radio triggers and more batteries and time to put all this together

Lighting can be one of the most challenging aspects of photography, and yet it is so key. An external flash unit is one of the most effective ways of ensuring a correct exposure, but setting them up and usage them correctly is again a major challenge.
The biggest weakness of built-in and auxiliary flashguns is that the quality of light they emit is pretty unimpressive. Because the flash is a high-intensity light source that originates from a relatively small area close to the lens, it yields flat, uneven lighting that creates deep, harsh shadows.
The key to improving the quality and flexibility of flashgun lighting is to enlarge and soften the light source, and fire it at the subject from a more natural direction. To accomplish the latter you need to completely separate the unit from your camera and to achieve that, this Yongnuo lighting kit is all you need.

Using two or more flashguns will extend your lighting options considerably. To avoid multiple flash exposure calculations the simplest, most effective way to connect several flashguns is via a wireless TTL multi-flash system.

Yongnuo YN600EX-RT specifications

Yongnuo YN-E3-RT specifications:

Yongnuo YN-E3-RT + 3x Yongnuo YN600EX-RT flashes kit - Package includes:

1 x Yongnuo YN-E3-RT flash commander
3 x Yongnuo YN600EX-RT flash speedlites

The post Yongnuo YN-E3-RT + 3x Yongnuo YN600EX-RT kit appeared first on Yongnuo Store.

Yongnuo YN568EX flash and Yongnuo YN622N commander and trigger kit are a great combination if you are interested in off-camera lighting. Yongnuo YN622N-TX flash commander together with YN622N transceiver allow you to trigger YN568EX flash remotely. This master unit also gives you full remote control of YN568EX flash speedlite. It is very convenient when flash is mounted on light stand and you are using light modifiers. There is no need to go to the flash and change parameters, you can do everything remotely by adjusting them on YN622N-TX commander and these settings are immediately transmitted to flash unit.

Yongnuo YN568EX flash doesn’t have built in wireless receiver so you need separate radio trigger to trigger it remotely. You need Yongnuo YN622N-TX commander mounted on camera and one YN622N receiver mounted on YN568EX flash.
Lighting can be one of the most challenging aspects of photography, and yet it is so key. An external flash unit is one of the most effective ways of ensuring a correct exposure, but setting them up and usage them correctly is again a major challenge.
The biggest weakness of built-in and auxiliary flashguns is that the quality of light they emit is pretty unimpressive. Because the flash is a high-intensity light source that originates from a relatively small area close to the lens, it yields flat, uneven lighting that creates deep, harsh shadows.
The key to improving the quality and flexibility of flashgun lighting is to enlarge and soften the light source, and fire it at the subject from a more natural direction. To accomplish the latter you need to completely separate the unit from your camera and to achieve that, this Yongnuo lighting kit is all you need.

Using two or more flashguns will extend your lighting options considerably. To avoid multiple flash exposure calculations the simplest, most effective way to connect several flashguns is via a wireless TTL multi-flash system.

Yongnuo YN568EX specifications

Yongnuo YN622N-TX specifications:

Yongnuo YN622N kit + Yongnuo YN568EX - Package includes:

1 x Yongnuo YN622N trigger and flash commander kit
1 x Yongnuo YN568EX flash speedlite

The post Yongnuo YN568EX + YN622N KIT appeared first on Yongnuo Store.

Yongnuo YN568EX II flash and Yongnuo YN622C commander and trigger kit are a great combination if you are interested in off-camera lighting. Yongnuo YN622C-TX flash commander together with YN622C transceiver allow you to trigger YN568EX II flash remotely. This master unit also gives you full remote control of YN568EX II flash speedlite. It is very convenient when flash is mounted on light stand and you are using light modifiers. There is no need to go to the flash and change parameters, you can do everything remotely by adjusting them on YN622C-TX commander and these settings are immediately transmitted to flash unit.

Yongnuo YN568EX II flash doesn’t have built in wireless receiver so you need separate radio trigger to trigger it remotely. You need Yongnuo YN622C-TX commander mounted on camera and one YN622C receiver mounted on YN568EX II flash.
Lighting can be one of the most challenging aspects of photography, and yet it is so key. An external flash unit is one of the most effective ways of ensuring a correct exposure, but setting them up and usage them correctly is again a major challenge.
The biggest weakness of built-in and auxiliary flashguns is that the quality of light they emit is pretty unimpressive. Because the flash is a high-intensity light source that originates from a relatively small area close to the lens, it yields flat, uneven lighting that creates deep, harsh shadows.
The key to improving the quality and flexibility of flashgun lighting is to enlarge and soften the light source, and fire it at the subject from a more natural direction. To accomplish the latter you need to completely separate the unit from your camera and to achieve that, this Yongnuo lighting kit is all you need.

Using two or more flashguns will extend your lighting options considerably. To avoid multiple flash exposure calculations the simplest, most effective way to connect several flashguns is via a wireless TTL multi-flash system.

Yongnuo YN568EX II specifications

Yongnuo YN622C-TX specifications:

Yongnuo YN622C kit + Yongnuo YN568EX II - Package includes:

1 x Yongnuo YN622C trigger and flash commander kit
1 x Yongnuo YN568EX II flash speedlite

The post Yongnuo YN568EX II + YN622C KIT appeared first on Yongnuo Store.

Yongnuo YN622C-TX flash commander, Yongnuo YN500EX flashes and YN622C II triggers are a great combination if you are interested in off-camera lighting. Yongnuo YN500EX is Yongnuo flash for Canon users, very similar to Canon 430EX II in terms of features and power output but much more affordable. Yongnuo YN622C II are the best radio triggers on the market. Pair them with YN622C-TX master unit and you have perfect kit for off-camera lighting.
Lighting can be one of the most challenging aspects of photography, and yet it is so key. An external flash unit is one of the most effective ways of ensuring a correct exposure, but setting them up and usage them correctly is again a major challenge.
The biggest weakness of built-in and auxiliary flashguns is that the quality of light they emit is pretty unimpressive. Because the flash is a high-intensity light source that originates from a relatively small area close to the lens, it yields flat, uneven lighting that creates deep, harsh shadows.
The key to improving the quality and flexibility of flashgun lighting is to enlarge and soften the light source, and fire it at the subject from a more natural direction. To accomplish the latter you need to completely separate the unit from your camera and to achieve that, this Yongnuo lighting kit is all you need.

Using two or more flashguns will extend your lighting options considerably. To avoid multiple flash exposure calculations the simplest, most effective way to connect several flashguns is via a wireless TTL multi-flash system.

Yongnuo YN622C-TX flash commander together with YN622C II transceivers allow you to trigger YN500EX flashes remotely. This master unit also gives you full remote control of YN500EX flashes. It is very convenient when flashes are mounted on light stands and you are using light modifiers. There is no need to go to the flash and change parameters, you can do everything remotely by adjusting them on YN622C-TX commander and these settings are immediately transmitted to flash units.

Yongnuo YN500EX flashes don’t have built in wireless receiver so you need separate radio triggers to trigger them remotely. You need Yongnuo YN622C-TX commander mounted on camera and one YN622C II receiver mounted on each YN500EX flash.

Yongnuo YN500EX specifications

Yongnuo YN622C-TX specifications:

Yongnuo YN622C-TX + 2x YN622C II + 2x Yongnuo YN500EX flashes kit - Package includes:

1 x Yongnuo YN622C-TX flash commander
2 x Yongnuo YN622C II transceivers
2 x Yongnuo YN500EX flash speedlites for Canon

The post Yongnuo YN622C-TX + 2x YN622C II + 2x Yongnuo YN500EX appeared first on Yongnuo Store.

Yongnuo YN685 flashes and Yongnuo YN622C-TX flash commander are a great combination if you are interested in off-camera lighting.
Lighting can be one of the most challenging aspects of photography, and yet it is so key. An external flash unit is one of the most effective ways of ensuring a correct exposure, but setting them up and usage them correctly is again a major challenge.
The biggest weakness of built-in and auxiliary flashguns is that the quality of light they emit is pretty unimpressive. Because the flash is a high-intensity light source that originates from a relatively small area close to the lens, it yields flat, uneven lighting that creates deep, harsh shadows.
The key to improving the quality and flexibility of flashgun lighting is to enlarge and soften the light source, and fire it at the subject from a more natural direction. To accomplish the latter you need to completely separate the unit from your camera and to achieve that, this Yongnuo lighting kit is all you need.

Using two or more flashguns will extend your lighting options considerably. To avoid multiple flash exposure calculations the simplest, most effective way to connect several flashguns is via a wireless TTL multi-flash system.

Yongnuo YN622C-TX flash commander allows you to trigger YN685 flashes remotely. This master unit also gives you full remote control of YN685 flashes. It is very convenient when flashes are mounted on light stands and you are using light modifiers. There is no need to go to the flash and change parameters, you can do everything remotely by adjusting them on YN622C-TX commander and these settings are immediately transmitted to flash units.

Yongnuo YN685 flashes have built in wireless receiver so you do not need separate radio triggers to trigger them remotely. You just need Yongnuo YN622C-TX commander mounted on camera. These are the first flash units with built in YN622C radio receiver for Canon system. It is more convenient (and also less expensive) than using other flashes without built in wireless receiver because for other flashes you will also need separate radio triggers and more batteries and time to put all this together

Yongnuo YN685 specifications

• GN 60m (ISO 100 / 200mm)
• HSS to 1/8000th
• Flash Modes – ETTL / Manual / Multi
• 1st Curtain Sync / 2nd Curtain Sync
• FEC / FEB – 1/3rd Increments (±3 stops)
• Manual Flash – 1/128 – 1/1 output control (1/3rd increments)
• 20 – 200mm Auto and Manual Flash Zoom
• Built-in Radio Slave Modes – YN622C & RF-603 / YN560, 2.4GHz RF Systems.
• Full Power Recycle – From 3 Seconds
• Supports Multiple Flash Groups
• Supports Multiple Channels
• Supports Mixed Mode (with YN-622C transmitter)
• Custom Functions
• Auto Save Settings
• Sound Prompt
• Heat Protection
• Large Dot Matrix LCD Screen
• Canon Like Interface
• AF Assist Light
• 360 Degree Swivel and Tilt Head
• Fast Clamping Metal Foot
• External HV Battery Port
• PC Sync Port

Yongnuo YN622C-TX specifications:

Yongnuo YN622C-TX + 2x Yongnuo YN685 flashes kit - Package includes:

1 x Yongnuo YN622C-TX flash commander
2 x Yongnuo YN685 flash speedlites

The post Yongnuo YN622C-TX + 2x Yongnuo YN685 appeared first on Yongnuo Store.

Yongnuo YN685 flashes and Yongnuo YN622C-TX flash controller are a great combination if you are interested in off-camera lighting. This is an excellent kit for a classic 3-point lighting. Yongnuo YN622C-TX flash commander allows you to trigger YN685 flash speedlites remotely. This master unit also gives you full remote control of YN685 flashes. It is very convenient when flashes are mounted on light stands and you are using light modifiers. There is no need to go to the flash and change parameters, you can do everything remotely by adjusting them on YN622C-TX commander and these settings are immediately transmitted to flash units.

Yongnuo YN685 flashes have built in wireless receiver so you do not need separate radio triggers to trigger them remotely. You just need Yongnuo YN622C-TX commander mounted on camera. These are the first flash units with built in YN622C radio receiver for Canon system. It is more convenient (and also less expensive) than using other flashes without built in wireless receiver because for other flashes you will also need separate radio triggers and more batteries and time to put all this together

Lighting can be one of the most challenging aspects of photography, and yet it is so key. An external flash unit is one of the most effective ways of ensuring a correct exposure, but setting them up and usage them correctly is again a major challenge.
The biggest weakness of built-in and auxiliary flashguns is that the quality of light they emit is pretty unimpressive. Because the flash is a high-intensity light source that originates from a relatively small area close to the lens, it yields flat, uneven lighting that creates deep, harsh shadows.
The key to improving the quality and flexibility of flashgun lighting is to enlarge and soften the light source, and fire it at the subject from a more natural direction. To accomplish the latter you need to completely separate the unit from your camera and to achieve that, this Yongnuo lighting kit is all you need.

Using two or more flashguns will extend your lighting options considerably. To avoid multiple flash exposure calculations the simplest, most effective way to connect several flashguns is via a wireless TTL multi-flash system.

Yongnuo YN685 specifications

• GN 60m (ISO 100 / 200mm)
• HSS to 1/8000th
• Flash Modes – ETTL / Manual / Multi
• 1st Curtain Sync / 2nd Curtain Sync
• FEC / FEB – 1/3rd Increments (±3 stops)
• Manual Flash – 1/128 – 1/1 output control (1/3rd increments)
• 20 – 200mm Auto and Manual Flash Zoom
• Built-in Radio Slave Modes – YN622C & RF-603 / YN560, 2.4GHz RF Systems.
• Full Power Recycle – From 3 Seconds
• Supports Multiple Flash Groups
• Supports Multiple Channels
• Supports Mixed Mode (with YN-622C transmitter)
• Custom Functions
• Auto Save Settings
• Sound Prompt
• Heat Protection
• Large Dot Matrix LCD Screen
• Canon Like Interface
• AF Assist Light
• 360 Degree Swivel and Tilt Head
• Fast Clamping Metal Foot
• External HV Battery Port
• PC Sync Port

Yongnuo YN622C-TX specifications:

Yongnuo YN622C-TX + 3x Yongnuo YN685 flashes kit - Package includes:

1 x Yongnuo YN622C-TX flash commander
3 x Yongnuo YN685 flash speedlites

The post Yongnuo YN622C-TX + 3x Yongnuo YN685 kit appeared first on Yongnuo Store.

Yongnuo YN568EX flashes, Yongnuo YN622N-TX flash commander and YN622N II triggers are a great combination if you are interested in off-camera lighting. Yongnuo YN568EX is the best Yongnuo flash for Nikon users, very similar to Nikon SB910 in terms of features and power output but much more affordable. YN622N II are the best radio triggers on the market. Pair them with YN622N-TX master unit and you have perfect kit for off-camera lighting.
Lighting can be one of the most challenging aspects of photography, and yet it is so key. An external flash unit is one of the most effective ways of ensuring a correct exposure, but setting them up and usage them correctly is again a major challenge.
The biggest weakness of built-in and auxiliary flashguns is that the quality of light they emit is pretty unimpressive. Because the flash is a high-intensity light source that originates from a relatively small area close to the lens, it yields flat, uneven lighting that creates deep, harsh shadows.
The key to improving the quality and flexibility of flashgun lighting is to enlarge and soften the light source, and fire it at the subject from a more natural direction. To accomplish the latter you need to completely separate the unit from your camera and to achieve that, this Yongnuo lighting kit is all you need.

Using two or more flashguns will extend your lighting options considerably. To avoid multiple flash exposure calculations the simplest, most effective way to connect several flashguns is via a wireless TTL multi-flash system.

Yongnuo YN622N-TX flash commander together with YN622N II transceivers allow you to trigger YN568EX flashes remotely. This master unit also gives you full remote control of YN568EX flashes. It is very convenient when flashes are mounted on light stands and you are using light modifiers. There is no need to go to the flash and change parameters, you can do everything remotely by adjusting them on YN622N-TX commander and these settings are immediately transmitted to flash units.

Yongnuo YN568EX flashes don’t have built in wireless receiver so you need separate radio triggers to trigger them remotely. You need Yongnuo YN622N-TX commander mounted on camera and one YN622N receiver mounted on each YN568EX flash.

Yongnuo YN568EX specifications

Yongnuo YN622N-TX specifications:

Yongnuo YN622N-TX + 2x YN622N II + 2x Yongnuo YN568EX flashes kit - Package includes:

1 x Yongnuo YN622N-TX flash commander
2x Yongnuo YN622N II transceivers
2 x Yongnuo YN568EX flash speedlites for Nikon

The post Yongnuo YN622N-TX + 2x YN622N II + 2x Yongnuo YN568EX appeared first on Yongnuo Store.

Yongnuo YN685 is the first Yongnuo flash for Nikon system with YN622N radio receiver built-in. This is the top of the line flash speedlite for Nikon system. Yongnuo YN685 will be an ideal upgrade if you need additional light and you are already using or investing into YN622N system. You will save because you do not need additional YN622N II trigger and also you do not need additional AA batteries. With 60 guide number this is one of the most powerful flashes from Yongnuo and also on the market at the moment. A great alternative to Nikon SB910/SB700 speedlites.

With a built-in YN622N radio transceiver, the YN685 Wireless TTL Speedlite from Yongnuo offers complete radio slave functionality with both the YN-622N and RF-603/YN-560 radio systems for maximum compatibility with your existing gear. The flash is also compatible with Nikon i-TTL flash system when mounted to the camera and has a powerful guide number of 60m at ISO 100 and 200mm. Benefiting this power is a wide zoom range which will cover 20-200mm in full frame and it has a diffuser for wide angle lenses. Full bounce and tilt is available as well with tilt upwards up to 90° and rotation left and right of 180°.

Operation is simplified with a clear LCD screen on the back, a dial, and a selection of buttons. The head also offers a pull-out bounce panel for reflecting some light forward when using the tilt functionality. Full sync options are available as well with high-speed, 1st & 2nd curtain sync. It conveniently on 4 AA batteries and has a recycle time of 3 seconds at full power and has an HV power port for battery packs. Additionally, it has a PC sync port.

Yongnuo YN685N is a fully featured on-camera i-TTL flash, as well as providing Radio Slave Modes for both the Yongnuo YN622N (II) and RF-603 / YN560 radio systems.
This means current compatible transmitter units include the YN-622N, YN622N II, YN-622N-TX, YN560 IV Flash, YN560-TX, RF-605, RF-603 II and original RF-603.
The YN685 provide an HV Battery Port for attaching external high voltage battery packs, as well as a PC Sync Port.
The YN685 provide a long awaited Radio Slave Flash for the very popular YN-622N TTL trigger system. Another advantage of YN685N is cross compatibility with the inexpensive YN560-TX / YN-560 III / YN560 IV Remote Manual flash system

Yongnuo YN685 - Radio Slave Functions

USING TRANSMITTTER – YN-622N / YN-622N-TX

• i-TTL /Manual / Multi
• HSS to 1/8000th
• 1st Curtain Sync / 2nd Curtain Sync
• FEC / FEB – 1/3rd Increments (±3 stops)
• Remote Flash Power – 1/128 – 1/1 (1/3rd increments)
• Remote Flash Zoom 20-200mm – Auto and Manual
• Group Control

USING TRANSMITTER – YN560-TX / YN560 IV 

• Remote Flash Power – 1/128 – 1/1 (1/3rd increments)
• Remote Flash Zoom 20-200mm – Manual
• Group Control

USING TRANSMITTER – RF-605

• Fire the Flash
• Group Control

USING TRANSMITTER – RF-603 II / RF-603

• Fire the Flash Only

Yongnuo YN685 - specifications:

• GN 60m (ISO 100 / 200mm)
• HSS to 1/8000th
• Flash Modes – iTTL / Manual / Multi
• 1st Curtain Sync / 2nd Curtain Sync
• FEC / FEB – 1/3rd Increments (±3 stops)
• Manual Flash – 1/128 – 1/1 output control (1/3rd increments)
• 20 – 200mm Auto and Manual Flash Zoom
• Built-in Radio Slave Modes – YN622N & RF-603 / YN560, 2.4GHz RF Systems.
• Full Power Recycle – From 3 Seconds
• Supports Multiple Flash Groups
• Supports Multiple Channels
• Supports Mixed Mode (with YN-622N transmitter)
• Custom Functions
• Auto Save Settings
• Sound Prompt
• Heat Protection
• Large Dot Matrix LCD Screen
• Canon Like Interface
• AF Assist Light
• 360 Degree Swivel and Tilt Head
• Fast Clamping Metal Foot
• External HV Battery Port
• PC Sync Port

Yongnuo YN685 - compatible with:

Nikon D810, D750, D610, D600, D700, D3s, D3x, D4s, D4x, D5, D7000, D7100, D7200, D5100, D5200, D5300, D3100, D3200, D3300, D3500, D300, D300s, D90, D80, D200 and any other newer Nikon DSLR camera

Yongnuo YN685 - package includes:

1 x Yongnuo YN685N flash speedlite for Nikon
1 x Mini Stand
1 x Manual in English and Chinese
1 x Original box
1 x Soft case for flash

The post Yongnuo YN685 for Nikon appeared first on Yongnuo Store.

Yongnuo YN622C II is a newer version of the original YN622C triggers. Updates to the very popular original YN622C TTL triggers include quick release lever locking hotshoes, most importantly USB ports for firmware updates, as well as an easily selectable 560-RX mode, and slightly more flush mounted buttons.

Trigger flashes wirelessly with this 2-pack of YN-622C II E-TTL Wireless Flash Transceivers from Yongnuo. Compatible with Canon E-TTL / E-TTL II cameras and with added support for 622 and 560-RX communication protocols this set will function well with many flash units. For usage, one transceiver slides directly into the hot shoe and utilizes a 2.4 GHz frequency with a range of 100m to trigger the remote flashes mounted on the other transceiver. A variety of features have been added in the model, including support for group ratios and multi flash. The transceivers also have a hot shoe and PC sync port available for mounting a flash unit or connecting to a strobe. When connected to a strobe, a Super Sync function will allow photographers to achieve a faster sync speed than generally possible with their camera. Additionally, there are both TTL and manual flash modes available for full creative control. And, it can utilize 7 channels and 3 groups for setting up multiple flash units easily and efficiently.

The YN622C II utilizes a series of LEDs to display settings and allow users to make adjustments. On the device is also an AF assist beam to help in low-light conditions. Multiple sync modes are available for more specific needs or effects, including 1st and 2nd curtain sync. A high speed sync mode is available when a flash is connected via the PC sync port and will help in bright lighting conditions and for stopping motion with a maximum speed of 1/8000 second. Additionally, the transceivers run on 2 AA batteries each.

The updated YN622C II triggers again provide an 560-RX communication mode, as we have already seen in the Version 1.2 of YN-622C available since January 2015. Though this 560-RX mode is now easily selectable via the units On / Off switch. The 560-RX mode allows the Remote Manual YN560-TX to act as a transmitter unit to YN622C II as receivers, while providing remote manual power, and remote zoom control.

(The Manual YN560, and TTL YN622 systems where originally completely separate and incompatible systems. With this Yongnuo is now working to slowly provide some compatibility between them).
Yongnuo YN622C mark II triggers for Canon are the world’s most popular choice for multiple flashes photography. YN622 II triggers support TTL, HSS, manual, multi modes, Flash Exposure Compensation, Flash Exposure Bracketing, modeling Flash, E-TTL group ratios and much more…
These are the most popular triggers worldwide. Paired with YN622C-TX master controller they have all the same functions as much more expensive Phottix Odin, Pixel King or Pocket Wizards. I have never heard of someone who is not impressed with Yongnuo YN-622C II triggers.

YN-622C II E-TTL wireless flash trigger is a high performance master and slave equipment for multiple flashes photography. Using Digital FSK 2.4GHz frequency band with 7 channels, it has three modes, E-TTL ( II ), Manual and Multi, and it can fire flashes at 360 degree direction. The operating range is up to 100 metres. These triggers support FEC, FEB, FEL, High-speed Sync, 1st. curtain, 2nd. curtain, modeling flash, ETTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp…

YN622 triggers have few main advantages over cheaper RF-603 II triggers. The most important differences are:

TTL support – RF-603 triggers are manual-only triggers, YN622 triggers work in TTL mode
Sync speed – YN622 triggers synchronize at speeds up to 1/8000, RF-603II triggers synchronize at speeds up to 1/320, depending on camera model.
AF Assist beam – YN622 triggers have built in AF Assist lamp which helps camera to focus in low light situations. RF-603 II triggers do not have it.
Remote control over flash parameters. YN622 allow remote controlling of all main functions of flash speedlites, while RF-603 II do not.

Yongnuo YN622C II features

• Yongnuo YN622C II triggers support Full ETTL Pass-through function when on camera – 1) Mount one YN-622C II transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode. 2) Mount flash on hot shoe of YN-622C II transceiver already placed on camera, mount the second flash on other transceiver, both of flashes can be triggered at any direction in TTL, Manual or Multi mode.
• Shutter Sync – The max. sync speed is 1/8000s, but some cameras support only up to 1/4000s, and for those cameras and flashes which don’t suport HSS, the sync. speed will be just 1/250s or less. Different cameras have different Sync speed. This depends on camera, and it is not a limitation of YN622C II triggers.
• YN622C II triggers support 1st and 2nd curtain sync
• Remote Control Function – The parameter of flashes mounted on hot shoes of receivers can be set up remotely through the camera menu. You can find external speedlite menu in cameras options. There you will change all parameters of remote speedlite
• Support mixed mode – With this function, you can trigger remote speedlites in different modes; set up one YN-622C mark 2 transceiver on hot shoe of flash in TTL mode, set up the second YN-622C II transceiver on hot shoe of flash in manual mode, and the third YN-622C II transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver mounted on hot shoe of camera. This mode is especially useful for some older camera bodies without a built-in flash menu. ( you need to set the parameters on speedlites )Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manual and Multi output need to be set on the flash speedlite.
• YN622C II triggers work with Strobe Studio flash light in HSS function – You can buy a PC Sync Cable LS-PC635 cable to connect the transceiver with the studio flash strobe, and then you can use the non-high speed sync flash to achieve higher synchronization and then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage.
  Note: The PC port is for output use only.
• Awakening function – When half-pressing the shutter button of the camera, the hot shoe flash mounted on the receiver will be awakened. ( for those flashes which support wake up function).
• Zoom Function – Zoom Automatic: zoom length will be changed depending on the changes of the lens setting.
  Zoom Manual: Zoom length can be set within 24 – 105mm range
  Zoom Lock
• Support Single-contact of camera and flash triggering – You can use YN622C II trigger with Nikon camera or Nikon flash, but you have to set YN-622C II in manual mode (the max. Sync. speed is 1/250s in this case).
• Flash Fire Ratios with ETTL – You can set up different flash fire ratios and FEC for those flashs on hot shoe of receivers
• YN622C II triggers use 2x AA batteries, (1.2v rechargeable battery or Alkaline), Stand-by time is 60 hours.
• Dimension: 89.5 * 53 * 39mm, net weight is 78g

Yongnuo YN622C II - compatible with:

Compatible cameras:

The Canon EOS DSLR cameras with external flash control menu: Canon 5D Mark II, 5Ds, 5Dsr, 5D Mark III, 1Dx, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D mark II, 6D, 70D, 7D, 60D, 50D, 40D, 450D, 500D, 550D, 600D, 650D, 700D, 750D, 760D, 1000D, 1100D, 1200D and any newer Canon DSLR camera

The Canon EOS DSLR Cameras without external flash control menu: Canon 5D, 10D, 20D, 30D, 300D, 350D, 1D, 1D Mark II

Studio strobes:
You can use YN-622C II triggers to fire studio strobes. You just need sync cable. Please check our excellent LS-PC635 sync cable

Yongnuo YN622C II - package includes:

2 x Yongnuo YN-622C II transceivers for Canon
1 x Instruction in English and Chinese
1 x Original Yongnuo Box

The post Yongnuo YN622C II appeared first on Yongnuo Store.