No products in the cart.
Home/Photography Lighting kits
Yongnuo YN-E3-RT + 2x Yongnuo YN600EX-RT
This bundle consists of 2x Yongnuo YN600EX-RT flashes and Yongnuo YN-E3-RT flash controller. Yongnuo YN600EX-RT speedlites are Yongnuo’s top of the line flashes for Canon shooters. These flashes are fully compatible with Canon 600EX-RT speedlites but with much lower price tag. Yongnuo YN-E3-RT commander is also included in this kit to allow you to trigger these flashes remotely for much more creativity
Yongnuo YN-E3-RT + 2x Yongnuo YN600EX-RT flashes kit
Yongnuo YN600EX-RT flashes and YN-E3-RT flash commander are a great combination if you are interested in off-camera lighting.
Lighting can be one of the most challenging aspects of photography, and yet it is so key. An external flash unit is one of the most effective ways of ensuring a correct exposure, but setting them up and usage them correctly is again a major challenge.
The biggest weakness of built-in and auxiliary flashguns is that the quality of light they emit is pretty unimpressive. Because the flash is a high-intensity light source that originates from a relatively small area close to the lens, it yields flat, uneven lighting that creates deep, harsh shadows.
The key to improving the quality and flexibility of flashgun lighting is to enlarge and soften the light source, and fire it at the subject from a more natural direction. To accomplish the latter you need to completely separate the unit from your camera and to achieve that, this Yongnuo lighting kit is all you need.
Using two or more flashguns will extend your lighting options considerably. To avoid multiple flash exposure calculations the simplest, most effective way to connect several flashguns is via a wireless TTL multi-flash system.
Yongnuo YN-E3-RT flash commander allows you to trigger YN600EX-RT flashes remotely. This master unit also gives you full remote control of YN600EX-RT flashes. It is very convenient when flashes are mounted on light stands and you are using light modifiers. There is no need to go to the flash and change parameters, you can do everything remotely bu adjusting them on YN-E3-RT commander and these settings are immediately transmitted to flash units.
Yongnuo YN600EX-RT flashes have built in wireless receiver so you do not need separate radio triggers to trigger them remotely. You just need Yongnuo YN-E3-RT commander mounted on camera. These are the first flash units with built in radio receiver for Canon system. It is more convenient (and also less expensive) than using other flashes without built in wireless receiver because for other flashes you will also need separate radio triggers and more batteries and time to put all this together
Yongnuo YN600EX-RT specifications
|Circuit design||Insulated Gate Bipolar Transistor (IGBT)|
|Guide Number||60 meters (ISO 100, 200mm)|
|Flash mode||HSS, TTL, M, MULTI, GR|
|Trigger Mode||Set-top, wireless master mode, wireless slave mode, Sc, Sn, S1, S2|
|Wireless triggering distance||20~25m indoor, 10~15m outdoor|
|Zoom range||20, 24, 28, 35, 50, 70, 80, 105, 135, 200mm|
|Vertical rotation angle||-7~90 degrees|
|Horizontal rotation angle||0~360 degrees|
|Power supply||4×AA size batteries (Alkaline or Ni-MH are usable)|
|Lighting times||100~1500 times (AA alkaline cell used)|
|Recycle time||approx 3s (AA alkaline cell used)|
|Flash control||8 levels of output control (1/128~1/1), 29 levels of fine tuning|
|External interface||hot shoe, PC port|
|Additional features||Master flash, High-Speed sync, Second-curtain sync, FEC, FEB, FEV, manual zoom,|
auto zoom, sound prompt, advanced setting, automatically saving setting, PC port,
power saving mode and over heat protection
|Dimensions||62×78×214mm (Extended state)|
Yongnuo YN-E3-RT specifications:
|Type:||On-camera Speedlite transmitter|
|Compatible Cameras:||EOS type-A Cameras compatible with E-TTL II / E-TTL autoflash|
|Exposure control system:||E-TTL II / E-TTL autoflash, manual flash, stroboscopic flash, auto external flash metering|
( only when the flash mode is set to “GR” )
|Frequency:||2405 – 2475 MHz|
|Modulation system:||Primary modulation: OQPSK, Secondary modulatioin: DS-SS|
|Channel:||Auto, Ch.1 – 15|
|Wireless radio ID:||0000-9999|
|Slave unit control:||up to 5 groups ( A/B/C/D/E), up to 15 units|
|Transmission distance:||Approx. 100m|
|Flash ratio control:||1:8-1:1-8:1, 1/2-stop increments flash exposure|
|Compensation:||±3 stops in 1/3 – increments|
|FEB:||±3 stops in 1/3 – increments ( when used with flash exposure compensation )|
|FE Lock:||Press the camera’s ( M-Fn), ( FEL), or ( *) button|
|High speed synchronization:||Provided|
|Manual flash:||1/1 – 1/128 power ( 1/3-stop increments )|
|Stroboscopic flash||Provided ( 1-500Hz)|
|Power source:||1 AA/LR6 alkaline batteries Ni-MH Batteries|
|Wireless flash shooting:||approx. 10 hours continuously|
|Dimensions:||67.7 * 66.7 * 81.3mm|
Yongnuo YN-E3-RT + 2x Yongnuo YN600EX-RT flashes kit - Package includes:
1 x Yongnuo YN-E3-RT flash commander
2 x Yongnuo YN600EX-RT flash speedlites
Be the first to review “Yongnuo YN-E3-RT + 2x Yongnuo YN600EX-RT”
You must be logged in to post a comment.
There are no reviews yet.