No products in the cart.
Yongnuo YN568EX + YN622N KIT
This bundle consists of Yongnuo YN568EX flash and Yongnuo YN622N trigger and flash controller kit. Yongnuo YN568EX flash speedlite is Yongnuo’s TTL, HSS flash for Nikon shooters. Yongnuo YN622N kit is included in this bundle to allow you to trigger this flash remotely for much more creativity. With this kit you can move flash away from camera and get into off-camera lighting
Yongnuo YN568EX + YN622N kit with trigger and commander
Yongnuo YN568EX flash and Yongnuo YN622N commander and trigger kit are a great combination if you are interested in off-camera lighting. Yongnuo YN622N-TX flash commander together with YN622N transceiver allow you to trigger YN568EX flash remotely. This master unit also gives you full remote control of YN568EX flash speedlite. It is very convenient when flash is mounted on light stand and you are using light modifiers. There is no need to go to the flash and change parameters, you can do everything remotely by adjusting them on YN622N-TX commander and these settings are immediately transmitted to flash unit.
Yongnuo YN568EX flash doesn’t have built in wireless receiver so you need separate radio trigger to trigger it remotely. You need Yongnuo YN622N-TX commander mounted on camera and one YN622N receiver mounted on YN568EX flash.
Lighting can be one of the most challenging aspects of photography, and yet it is so key. An external flash unit is one of the most effective ways of ensuring a correct exposure, but setting them up and usage them correctly is again a major challenge.
The biggest weakness of built-in and auxiliary flashguns is that the quality of light they emit is pretty unimpressive. Because the flash is a high-intensity light source that originates from a relatively small area close to the lens, it yields flat, uneven lighting that creates deep, harsh shadows.
The key to improving the quality and flexibility of flashgun lighting is to enlarge and soften the light source, and fire it at the subject from a more natural direction. To accomplish the latter you need to completely separate the unit from your camera and to achieve that, this Yongnuo lighting kit is all you need.
Using two or more flashguns will extend your lighting options considerably. To avoid multiple flash exposure calculations the simplest, most effective way to connect several flashguns is via a wireless TTL multi-flash system.
Yongnuo YN568EX specifications
|High-speed Sync||The max. sync speed is 1/8000s|
|Guide No.||58 meters (ISO 100, 105mm)|
|Flash mode||High-speed Sync HSS ,TTL , M , MULTI|
|Wireless trigger||N’s & C’s wireless system, S1, S2 pre-flash-canceled mode|
|Wireless triggering distance||20~25m indoor, 10~15m outdoor|
|Slave groups||3(A, B, and C)|
|Vertical rotation angle||-7~90 degrees|
|Horizontal rotation angle||0~270 degrees|
|Power supply||4×AAsize batteries (Alkaline or Ni-MH are usable)|
|Lighting times||100~1500 times (AA alkaline cell used)|
|Recycle time||approx 3s (AA alkaline cell used)|
|Flash control||8 levels of output control (1/128~1/1), 22 levels of fine tuning|
|External interface||hot shoe, PC port and eternal charging port|
|Additional features||Rear-curtain sync, FEC, FEB, FEV, modeling flash, manual zoom, auto zoom, sound prompt, advanced setting, automatically saving setting, PC port, power saving mode and over heat protection|
|Dimensions||60×190×78mm (Extended state)|
Yongnuo YN622N-TX specifications:
|Range||328′ (100 m)|
|Groups||3 (A, B, C)|
|Flash Modes||TTL, manual, multi|
|Sync Mode||1st curtain, 2nd curtain, high speed sync|
|Max Sync Speed||1/8000 sec|
|Interface||Triggering: Hot shoe, PC port|
Shutter Release: 2.5mm
Firmware Upgrade: mini-USB
|Battery||2 x AA battery|
|Battery Life||Standby: 120 hours|
|Dimensions||3.5 x 2.1 x 1.5″ (9.0 x 5.3 x 3.9 cm)|
|Weight||2.9 oz (82 g)|